- You can use the 'AND' / 'OR' / 'NOT' option for the things you want to add or remove. - You can return to normal search by pressing the Cancel button.
The surfaces of titanium (Ti-6Al-4V) implants, which are widely preferred as implant material in medicine and dentistry, are biomimetically coated with nanohydroxyapatite (nHAp) in simulated body fluid (10XSBF) with microwave-assisted 10-f time concentration solution. A second layer was formed with different amounts of non-toxic AgNO3 to impart antibacterial properties to the implant materials coated with nHAp. In comparison of uncoated implants with nHAp and Ag-coated Ti-6Al-4V implants, surface morphologies were evaluated by SEM analysis, phase grade and structure were evaluated by XRD, and ...More
Two new Schiff bases ligands (HL1 and HL2) and their Co2, Mn2, Fe3, Ru3, Cr3, and VO2 complexes were synthesized and characterized by FT-IR, 1H-NMR, and Mass spect. and analytical methods. A single-crystal X-ray diffraction study determined the molecular structure of HL1. The catalytic effects of metal complexes on benzyl alcohol and potato starch (PS) oxidation were compared in an H-2O-2 medium. The percent conversion of benzyl alcohol to benzaldehyde and benzoic acid was determined by Gas Chromatography. [Co(L-1)(2)], [Mn(L-1)(2)], [Co(L-2)(2)], and [Mn(L-2)(2)] showed the highest catalytic ...More
An efficient methods for the synthesis of 2-(2,5-dimethylphenyl)-3-iodobenzo[b]thiophene (4) is described, and investigated its anode catalyst performance by using electrochemical methods (CV, CA and EIS). When 2-(2,5dimethylphenyl)-3-iodobenzo[b]thiophene (4) is applied, the specific activity is found as 25.811 mA/cm(2). Interestingly, when Palladium (Pd) is electrochemically deposited on the benzothiophene derivative, the catalytic activity increased the 80.930 mA/cm(2). This result is highest than the current metal based anode catalyst. Moreover, EIS and CA measurements display that Pd dope ...More
This paper presents a research work which focuses on generating synthetic data to enrich the training-set of a deep learning (DL) based classification system to classify power system transient events using PMU frequency measurements. The synthetically improved training-set is shown to increase the classification performance compared to the case when only the actual-data training-set is used. The proposed classification system helps to reveal high-frequency transient variation information out of PMU measurements collected at a relatively much lower rate, especially when a small set of training- ...More
With the discovery of self-accelerating beams, possibility of obtaining curved light beams in free space has been realized. These special beams paved the way for many new applications as well as the exploration of novel beam types. Recently, great research effort has been conducted to realize different types of curved beams such as photonic hook and airy beam. These curved types of beams are obtained by introducing structural asymmetry or applying non-uniform dielectric distribution to the input and output face of the structure. With this regard, we propose specially designed asymmetric struct ...More
Soot is one of the products of incomplete combustion of hydrocarbon fuels. It has the property of adsorption of active and carcinogenic substances on the surface of soot particles. In this regard, in burner equipment of medium and small power, it is required to develop and implement effective environmental measures to reduce emissions of soot particles. In this paper, the fuel oil-water-air system at a wide temperature range (T500-3000K) was studied and the ratio of gas-liquid flows (water content in fuel oil 5-15) at the maximum entropy of the system and the formation of soot in flue gases wa ...More
Modification of layered double hydroxides (LDHs) is known to be beneficial for boosting the consistent formation of reactive oxygen species (ROSs) and enhancing the photocatalytic process. Herein, a facile synthesis method for preparing carbon nanotube (CNT) and biochar (BC)-based NiCr LDH (NC) nanocomposites as a sonophotocatalyst for the efficient degradation of rifadin (RA) was provided. The formation of thin nanosheet structures of NC along with porous and nanotube structures of BC and CNT was well approved by scanning electron microscope (SEM) and high-resolution transmission electron mic ...More
Landfill leachate treatment involved with the membrane bioreactor (MBR) combined with membrane treatment via nanofiltration (NF) and/or reverse osmosis (RO) is widely used in Turkey. This treatment produces landfill leachate membrane concentrates (LLMCs) with an undesirably high concentration of contaminants. In the study, two different nanofiltration concentrates of leachate were coagulated. Coagulant dosages from 0.10 to 5.0 g of Me3/L (Me3: Al3 or Fe3), and the pH values ranged from 4.0 to 8.0 and 3.0-9.0 for Al-based and Fe-based coagulants, respectively. The most efficient pH values were ...More
Poly and perfluoroalkyl compounds (PFASs) are a group of chemicals that are widely used and are difficult to purify. Within this group, perfluorooctanoic acid (PFOA), known for its highly polar and strong carbon-fluorine bonds, is a frequently encountered species in surface water, drinking water, and groundwater. In this study, we investigated the efficiency of electrooxidation (EO) in PFOA removal, optimization of EO parameters, and groundwater simulation in a realistic scenario. The EO optimization experiments were performed with a boron-doped diamond (BDD) anode for different values of pH, ...More
Mountain animal food products are at the center of attention due to their intrinsic value and, as such, mountain beekeeping products deserve attention and effort for their valorisation. The work aimed at investigating the quality traits of mountain honey samples from Kyrgyzstan, giving particular emphasis on the amino acid profiles and their possible relationship with the other chemical-physical characteristics. The moisture content, acidity, pH, and diastase activity of honey samples were within the limits established by normative documents. The honey samples showed a higher diastase activity ...More
Because of the toxic impacts on human health, the arsenic (As) limit value in drinking water was decreased from 50 to 10 μg l −1 by the relevant authorities (WHO 1993; US EPA 2001). In this case, the problem of As pollution in natural water resources used for drinking water has grown even more and turned into a global crisis. According to reports in many parts of the world, over about 230 million people appear to be affected by high arsenic concentrations in groundwater. In this case, it turned out that there was a great need for cost-effective and environmentally friendly technologies from dr ...More
A broadband, stable, and noniterative free-space method is proposed for dielectric constant ε′r determination of low-loss dielectric slabs from reflection-only measurements through simple calibration standards (reflect and air). It is applicable for dispersive samples and does not require thickness information. Simulations of nondisperive and dispersive samples are performed to validate our method. Dielectric constant measurements of polyethylene and polyoxymethylene samples (9–11 GHz) are carried out to examine the accuracy of our method.