Waveform Correlation Based Harmonic Voltage Contribution Determination of Iron and Steel Plants Supplied From PCC

Özgül SALOR-DURNA

In this research work, a new method which determines the individual harmonic voltage contributions of the EAF plants supplied from a point of common coupling (PCC) to the PCC voltage is presented. EAFs are one of the most significant sources of the harmonics, especially the uncharacteristic ones, therefore it is important to be able to discriminate the amount of individual contributions from the feeders of a PCC supplying multiple EAFs. The proposed method uses the relationship derived between the correlation coefficient of the PCC voltage and the feeder current waveforms and the harmonic volt ...Более

On the R -compactification of uniform spaces

As it is well known, there are various constructions of the R-compactification (Hewitt real compactification) of a uniform space [13], [15]. In this work we propose a new construction of the R-compactification (Hewitt real compactification) of a uniform space. Keyword: A0-boundedness; R-compactification; R-completeness.; R-extension

Machine learning enabled the design of compact and efficient wavelength demultiplexing photonic devices

Mirbek TURDUEV

In this paper, we introduce the design approach of integrated photonic devices by employing reinforcement learning known as attractor selection (AttSel). Here, we combined 3D FDTD with AttSel algorithm, which is based on artificial neural networks, to achieve ultra-compact and highly efficient wavelength demultiplexers with low crosstalk such as. The presented devices consist of SOI materials, which are compatible with complementary MOS technology. Consequently, the reinforcement learning is successfully applied to design smaller and superior integrated photonic devices. Keyword: inverse desig ...Более

Optimal Design of Omni-directional Optical Cloaking by Annular Sectorized Unit-cells

Mirbek TURDUEV

In this manuscript, we demonstrate the design and experimental proof of an optical cloaking structure which multi-directionally conceals a perfectly electric conductor (PEC) object from an incident plane wave. The dielectric modulation around the highly reflective scattering PEC object is determined by an optimization process for multi-directional cloaking purposes. Keyword: component; formatting; insert; style; styling

On the Solvability of a Boundary Value Problem for Nonlinear Optimization of Oscillatory Processes

Elmira ABDILDAYEVA

The paper investigates the solvability of a boundary value problem in the control of an oscillatory process described by control in partial derivatives of the first order. It has been established that there are an infinite set of controls, as solutions to the system of nonlinear Fredholm integral equations of the first kind, each of which transfers the controlled process from the initial state to the final specified state in a specified time. Sufficient conditions for the existence of a nonlinear optimization solution are found.

Investigation of Battery Energy Storage Utilization Strategies for Reducing the Unscheduled Power Flows in the Interconnection Lines Caused by Multiple Electric Arc Furnace Operations

Özgül SALOR-DURNA

In this paper, utilization strategies for battery energy storage systems (BESS) are assessed in order to reduce the unscheduled power flows in the interconnection lines caused by multiple electric arc furnace operations in Turkey. Turkish electricity network is synchronously connected to the European Network of Transmission System Operators for Electricity (ENTSO-E) via 3 EHV transmission lines. Extensive amount of intermittent loads like electric arc furnaces (EAF) in the electricity network cause unscheduled power deviations at the intertie lines hence Area Control Error (ACE) performance de ...Более

An Electric Arc Furnace Model Based on Resynthesis Using Frequency Spectrum Distributions of EAF Currents

Özgül SALOR-DURNA

The research work presented in this paper proposes a method for modeling the behavior of the Electric Arc Furnace (EAF) currents for a tap-to-tap time based on the DFT amplitude histograms of the EAF current waves. The method is used to model the EAF current behavior separately for each phase of the EAF operation: boring, melting and refining. The model is verified by comparing the THD histograms and the flicker measurements of the original and modeled EAF current waveforms. The proposed model can be used as an EAF model in the simulation environment for various purposes before the installatio ...Более

Asymptotics of the Solution of Parabolic Problems with Multipoint Stationary Phase

Asan ÖMÜRALİEV | Ella ABILAYEVA

The aim of this paper is to construct regularized asymptotics of the solution of a singularly perturbed parabolic problem when the limit operator has not range and with rapidly oscillating free term, its derivative of the phase vanishes at finite points. The vanishing of the first derivative of the phase of the free term induces transition layers. It is shown that the asymptotic solution of the problem contains parabolic, inner, corner and rapidly oscillating boundary-layer functions. Corner boundary-layer functions have two components: the first component is described by the product of parabo ...Более

On Solvability of Optimization Problem for Elastic Oscillations with Multipoint Sources of Control

Elmira ABDILDAYEVA

In the paper we investigate the optimal control problem for elastic oscillation under multipoint influences of external forces when oscillation process is described by Fredholm integro-differential equation. Sufficient conditions for unique solvability of nonlinear optimization problem were found and the algorithm for constructing complete solution to this problem was developed.

Solutions of the Rational Difference Equations xn+1 = xn-11/1+xn-2xn-5xn-8

Dağıstan ŞİMŞEK | Burak OĞUL

In this paper a solution of the following difference equation xn+1=xn-111+xn-2xn-5xn-8 was investigated, where x-11, x-10, ..., x-2, x-1, x0 ∈ (0, ∞).

Topology of Soft Cone Metric Spaces

Dağıstan ŞİMŞEK

In Simsek's paper it was introduced a concept of soft cone metric space via soft elements and some fixed point theorems in soft cone metric space were provided. In this work, we examine topological structures such as open ball, soft neighbourhood and soft open set in soft metric spaces and their some properties, and prove that every soft cone metric space under some condition is a soft topological space according to elementary operations on soft sets.

Formulas for solution of Riccati's equationle

Avıt ASANOV

In this paper we obtained the formula for the common solution of Riccati equations. Here Riccati equations was solved for common cases. Results obtained have been compared with the conventional ones and a comment has been made on them.