- Вы можете использовать опцию И / ИЛИ / НЕ для критериев, которые вы хотите добавить или. - Вы можете вернуться к обычному поиску, нажав кнопку Отмена.
This paper presents a new waveform correlation based method which determines the individual harmonic voltage contributions of Electric Arc Furnace (EAF) plants supplied from a point of common coupling (PCC). The method is based on the waveform correlation computations between the PCC voltage and the feeder current at the individual harmonic frequency. PCCs supplying multiple EAF plants usually suffer from high voltage harmonic components due to their operation principles. A relationship between the correlation coefficient of the PCC voltage and the feeder current waveforms, and the harmonic vo ...Более
The research work presented in this paper proposes a field-data based method for modeling the behavior of the Electric Arc Furnace (EAF) currents for a tap-to-tap period. EAF current DFT distributions and fundamental frequency histograms obtained out of previously collected EAF currents are used to develop the proposed model, which offers a model for each phase of the EAF operation: boring, melting and refining. The model is verified by comparing the THD histograms and the flicker measurements of the original and the modeled EAF current waveforms. The aim of the proposed method is to provide a ...Более
In this research work, deep machine learning-based methods together with a novel data augmentation are developed for predicting flicker, voltage dip, harmonics, and interharmonics originating from highly time-varying electric arc furnace (EAF) currents and voltage. The aim with the prediction is to counteract both the response and reaction time delays of active power filters (APFs) specifically designed for electric arc furnaces (EAF). Multiple synchronous reference frame (MSRF) analysis is used to decompose the frequency components of the EAF current and voltage waveforms into dqo components. ...Более
In this research work, a new harmonic responsibility measure is proposed to extract the amount of harmonic responsibility of each plant supplied from the point of common coupling (PCC). The proposed method uses a function of the correlation coefficients between the voltage and current signals measured synchronously at the PCC. After the verification of the method on synthetic data generated in simulation environment, field data measurements of voltage and current are used to test the practicability of the proposed method. Harmonic contributions of the iron and steel (I&S) plants obtained using ...Более
In this research work, a deep learning (DL)-based method for the fast and accurate analysis of current harmonics of electric arc furnaces (EAF) is proposed. For such a system, a large amount of EAF current data is required for the training phase of the DL-based structure, which is not only a thorny but also an expensive procedure. Hence, the second focus of this research work is to gain the ability to generate EAF currents with realistic harmonic contents based on a much smaller amount of field data of EAF currents. For this purpose, EAF current data, recorded at a transformer substation suppl ...Более
In this article, a new approach to compensate both the response and reaction times of active power filters (APF) for special cases of highly time-varying harmonics and interharmonics of electric arc furnace (EAF) currents is proposed. Instead of using the classical approach of taking a window of past current samples and analyzing the data, future samples of EAF currents are predetected using a deep learning (DL)-based method and then analyzed, which provides the opportunity to make real-time analysis. This can also serve the needs of other possible APF applications. Two different methods for p ...Более